GoBearings.com
A comprehensive engineers' reference source for radial ball bearings and thrust ball bearing

 


Dynaroll
  LUBRICATION  

OIL LUBRICANTS

DYNAROLL LUBRICANT CODE
MANUFACTURER TRADE NAME
BASIC TYPE
WORKING TEMP
VISCOSITY Cs
CHARACTERISTICS
AF2
SHELL OIL AEROSHELL 12
Diester
-65 to 250 oF
(-54 to 121 oC)
89 @ 130 oF
Light general purpose oil (MIL-L-6085C)
WL2
Fuchs Lubricant Co. Windsor Lube L-245X
Diester
-65 to 250 oF
(-54 to 121 oC)
31 @ 100 oF
Light general purpose oil (MIL-L-6085C)
SW16
NSK
SW16 Plating Oil
Ester
-40 to 265 oF
(-40 to 130 oC)
90 @ 100 oF
Low SVP*, low torque, grease replacement
KC1
Dupont Krytox 143AC
Fluorocarbon
-30 to 550 oF
(-34 to 288 oC)

270 @ 100 oF

High temperature, very low SVP*
* SVP = Saturated Vapor Pressure

Note: Where grease is not suitable for a given application (e.g. for low torque), then a MIL-L-6085C oil lubricant is an industry standard. (If no lubricant specification is given by the user then Dynaroll bearings are normally supplied with AF2 lubricant, above.) Other oil lubricants are only to be used in specialized applications and may have limited availability or be expensive. Contact Dynaroll for more information on available oil lubricants.





Bearing Overview || Materials || Cages and Retainers || Shields and Seals || Bearing Geometry || Abec Tolerance
Lubrication || Load Rating and Lifetime || Bearing Failure || Noise || Torque || Mounting and Fitting
Preload || Bearing Handling || Adhesive Practices || Assembly Characteristics || Specify a Bearing || News

Dynaroll Copyright 2005