GoBearings.com
A comprehensive engineers' reference source for radial ball bearings and thrust ball bearing

 


  THRUST BALL BEARINGS  


Thrust ball bearings consist of two precision chrome steel washers (ring) and a ball complement spaced by bronze retainer. They can be supplied with or without radius ball grooves in the rings. Thrust bearings are used under purely axial loads.

The table below shows available bearings of the type you have selected. Basic dimensions and load ratings are given. To complete the bearing selection process CLICK ON THE PART NUMBER of the bearing that best meets your application (left column). This will take you to the DETAILED SPECIFICATION page where you will make final selection of other important bearing parameters.
Dimensions in mm
Dynaroll Bearing No.
BORE
(d1)
BORE
(d2)
OD
(D1)
OD
(D2)
Fillet Radius
(r)
Height
(H)
3.0
3.2
7.8
8.0
0.20
3.5
4.0
4.2
8.8
9.0
0.20
4.0
4.0
4.2
9.8
10.0
0.20
4.0
5.0
5.2
9.8
10.0
0.20
4.0
5.0
5.2
11.8
12.0
0.20
4.0
6.0
6.2
11.8
12.0
0.30
4.5
6.0
6.2
13.8
14.0
0.25
5.0
7.0
7.2
14.8
15.0
0.30
5.5
7.0
7.2
16.8
17.0
0.30
6.0
8.0
8.2
16.0
16.0
0.30
5.0
8.0
8.2
18.8
19.0
0.40
7.0
9.0
9.2
16.8
17.0
0.40
5.0
9.0
9.2
19.8
20.0
0.40
7.0
10.0
10.2
18.0
18.0
0.30
5.5

Note: Remove M from part number for ungrooved rings.






Bearing Overview || Materials || Cages and Retainers || Shields and Seals || Bearing Geometry || Abec Tolerance
Lubrication || Load Rating and Lifetime || Bearing Failure || Noise || Torque || Mounting and Fitting
Preload || Bearing Handling || Adhesive Practices || Assembly Characteristics || Specify a Bearing || News

Dynaroll Copyright 2005