GoBearings.com
A comprehensive engineers' reference source for radial ball bearings and thrust ball bearing

 


Dynaroll

               abec runout
               abec radial runout
               abec face runout
               ===============
               abec/iso inner ring tolerance
               abec tolerance
               iso tolerance
               abec outer ring tolerance
               abec runout measurement
        
  ABEC RUNOUT  

The tolerances shown in the ABEC and ISO tables are specific for basic bearing dimensions and require no further explanation. The following information may also help the design engineer use the runout values shown for different tolerance ratings.

RADIAL RUNOUT

Outer ring: The total indicator reading during one complete revolution of the outer ring with the inner ring remaining stationary.

Inner ring: The total indicator reading during one complete revolution of the inner ring with the outer ring remaining stationary.
FACE RUNOUT
Inner ring: The total indicator reading during one complete revolution of the inner ring with the outer ring remaining stationary.
Outer ring: The total indicator reading during one complete revolution of the outer ring with the inner ring remaining stationary.
FACE RUNOUT WITH BORE
The total indicator reading during one complete revolution of the inner ring.
O.D. RUNOUT WITH FACE
The total indicator reading during one complete revolution of the outer ring. The outer ring is positioned against 2 stops oriented at 90 to each other.






Bearing Overview || Materials || Cages and Retainers || Shields and Seals || Bearing Geometry || Abec Tolerance
Lubrication || Load Rating and Lifetime || Bearing Failure || Noise || Torque || Mounting and Fitting
Preload || Bearing Handling || Adhesive Practices || Assembly Characteristics || Specify a Bearing
Ball Bearing News || Site Map

Dynaroll Copyright 2005